This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Good day,
I just want to make sure if this is normal or not...
I have set up everything to the dot from the steps here:
https://www.victronenergy.com/live/battery_compatibility:pylontech_phantom
But what I see is after 48 hours with constant AC-in, the Quattro still stays absorption:
I never saw that it went to float, only see it in absorption...
Is this normal?
Thanks!
Hi @Goose
See faq Q7:
https://www.victronenergy.com/live/ess:design-installation-manual#faq
While discharging, and connected to the grid, the state can still show a charge state, such as Bulk, Absorption or Float. Even though it is not charging. This is normal, nothing to worry about.
Thank you for this, but I currently do not have ESS configured, only DVCC for Grid Backup.
Does the same argument apply?
Ah sorry.
The CANbus battery dictates the charge algorithm, so the same applies, it's just charging to the voltage the battery wants it to.
