This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi guys, have managed to add the ESS to my system via VE.configure...the issue is the inverter led is blinking...am currently on grid power, battery on float state, ESS mode keep battery charged....am yet to add solar panels....no error code in my Rpi running Venus os 2.51...is this normal?
Hi @Aizen yes it is normal.
Thanks for quick response. Should I worry about the battery discharge on VRM portal while on the rpi it shows float?
@Aizen I have no idea on this one. Our Easysolar is using its built in Color control for monitoring. If your system is behaving as it should be locally then I would not worry about the system itself.
This issue was happening even in HUB 1 assisstant....I had to remove the assistants and reinstall the multi plus firmware to restore normality...
Currently running the system without any assistants....just don’t know why ESS and HUB 1 are draining my back up battery...could it be a bug in Venus os 2.51
The ESS and Hub will work better when you have Solar panels installed. that's where they are designed to work. For now it will be just a back up power solution as the only way for it to charge is Grid.
Have also noticed that on VRM portal it shows battery discharging despite power requirement is less than 400w....grid is connected and stable
