Please guide the steps to set low cut off voltage at 22.2v, I am using MPPT 75/15 with bluetooth, 2x 12v 100Ah batteries (total 24v) and 2x100w solar panels.
Please suggest jumper settings and Victron connect app settings
Thanks,
Deepak
asked
Please guide the steps to set low cut off voltage, I am using MPPT 75/15 with bluetooth, 2x 100Ah batteries and 2x100w solar panels.
Hi @DeepakS
Set Connect to 'Conv. algorithm 1'. See 4.2 here: https://www.victronenergy.com/live/victronconnect:mppt-solarchargers
That should override the jumper, but Pin 1/2 should do it. See 3.6 here: https://www.victronenergy.com/upload/documents/Manual-BlueSolar-charge-controller-MPPT-75-10,-75-15,-100-15,-100-20,-100-20-48V-EN-NL-FR-DE-ES-SE-.pdf
Perhaps save these links for future reference..
