Cannot see the VE bus system in VRM?

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

ray asked Feb 28, '20

The VE bus system cannot be seen on the device list and hasn’t been seen for at least 24 hours now. What do I do? The firmware is up to date.

VE.Bus

cd1e4723-d7cc-4aa4-9b6f-b58719b0dd74.jpeg (246.6 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2020-02-28T11:52:12Z

JohnC answered · Feb 28, 2020 at 11:52 AM

You could try a reboot of the GX.

If that doesn't work, try reseating the VEBus cable at each end and/or changing it out completely. It's just a standard 'ethernet' cable.

There are Redetect/Reset options for the inverter in Remote Console, but I suspect you can't reach them.

But come back..

1

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

ray commented · Feb 28, 2020 at 01:44 PM

Thank you John. Did a reboot of the GX and all is working well now.

0 ·