question

jejochen avatar image
jejochen asked

Multiplus 2 general question

Hi,

Relatively new to this, and have a question. I just made my setup with 3 multiplus 2 48v 5000 units in 3 phase, with a lifepo4 made 30 kWh battery bank and batrium bms.

The color control however gives strange numbers on screen ( see attachment)


1 side note: i powerd up everything last evening, and the system was working well on battery usage, but this morning when i woke up, all power was down, and the ccgx gave a warning there was a phase shift detected. I had to switch 2 phases, but apparantly now the system is behaving weird to me. Any advice?

Multiplus-IIESS
20200225-121703.jpg (9.7 MiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Warwick Bruce Chapman avatar image
Warwick Bruce Chapman answered ·

For people to help with this, we are going to need some photos of the install and a diagram of how you have wired it.

Do you have an energy meter installed? What firmware version are you running? Which tool did you use to configure 3-phase and what settings did you apply?

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.