question

matthias-roetzer avatar image
matthias-roetzer asked

symmetric (3phase) feed in of exceess power

I'd like to achive a symmetric (3ph) feed in of excess power.

I've played a lot with ESS settings (especially phase compensation) but I couldnt achive the goal.

See the picture from what I have at the moment. What I would like to achive in this situation is to have around 400W per phase instead of the asymetric shown below.

Please let me have your ideas. Thank you!

The system 3 MultiPlusII 5000 attached to one 48V battery.

On AC-Out1 there are two SMA inverters on L2 and L3

THe PV charger consists of 3 MPPTs

ESS
1582625412582.png (32.1 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
matthias-roetzer avatar image
matthias-roetzer answered ·

Hi @mvader (Victron Energy)

Here another yet uncommented question.

Could be an option for symmetricalized feed in of PV excess power be worth to think about as feature for one of the next releases?

Best regards,
Matthias

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.