I will have the algorithm set to Lithium and I have three outputs from the charger. Would it be possible using one output charging Lithium house bank and next one charging AGM start battery? Anybody with know-how would be appreciated!
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I will have the algorithm set to Lithium and I have three outputs from the charger. Would it be possible using one output charging Lithium house bank and next one charging AGM start battery? Anybody with know-how would be appreciated!
Once set to Lithium, the charging algorithm is applied to all three outputs. Since the Lithium algorithm has a shorter absorption phase, the AGM battery will not get charged to 100%. Beside that AGM need a different charging profile in terms of voltage.
Additional resources still need to be added for this topic
11 People are following this question.