question

rhysboni avatar image
rhysboni asked

On Venius GX 2x MPTT charges

Hello,


We have two MPTT Charges for two solar PV systems, they are in close proximity.

Can i use one Venus GX to monitor each system separately on the VRM Portal?


Thanks

VRM
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

klim8skeptic avatar image klim8skeptic ♦ commented ·

2 separate pv systems and 1 battery?

0 Likes 0 ·
2 Answers
petajoule avatar image
petajoule answered ·

@RhysBoni Of course. Venus has two VE.Direct ports. Just connect each MPPT with one cable to Venus and you can monitor them on VRM separately.



1582107175733.png (28.5 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

rhysboni avatar image
rhysboni answered ·

Thanks,

Where does the system overview get the info, is it only showing one system? i can see the two systems in "advanced"

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

petajoule avatar image petajoule commented ·

Then it does see both. In the dashboard it just shows you a solar yield sum of all MPPTs.

You can check if it sees all devices when you go to device list - where they should be listed. (And do not click on "delete device")

0 Likes 0 ·