This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi, in document https://www.victronenergy.com/live/venus-os:gx_solaredge it is about setting up in SE converter at 485-1. However, this RS is used for SE metering and battery connection.
Is there anyone who has tried to water this? Why not use 485-2, which can also be set?
I want to upgrade my system and connect SolarEdge and Victron to one monitoring portal, but I have a LG 10H battery.
My SolarEdge SE10K has only one RS485 connection, on this connection both the VenusGX and Modbus meter (from SolarEdge) are connected. They work simultaneously on this single connection.
I assume this could also work when connecting the VenusGX to a second RS485 connection but I never tried it.
