Hi All,
Im running a Multiplus 12/800 off a bank of leaf cells setup in 4s and currently in VEconfig max charge is 16v, im wanting to get to 16.8v (or possibly 16.4v to go easy on the cells) to match to the leaf cells. a I believe im missing out on quite a bit of capacity. When I was checking compatibility I saw the inverters max voltage wa 17 so was hoping the charge settings would go up a bit higher than 16.
Is there a way to enable slightly higher charge voltage? Also interested in float / absorb settings, I currently have all of these set to 16v.
Cheers, Mike
