This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
My Blue Smart charger ip22 12|30 (1) when set on the high setting (14.7V) will rise in voltage to 15V in bulk and sit there in absorbsion for hours until float. Temperature is 10°. The batteries are new trojan t-105's and are in good working order. Is this normal behaviour as there is a lot of off-gassing in this phase. My other dc-dc and mppt charger set at 14.8V don't do this. Is this a fault and will this have damaged my batteries?
Hi col a,
The Blue Smart 12-30 is temperature compensated. It will automatically adjust the battery charging voltage based on the "chargers" temp at the start of a charge cycle.
0.3 volt rise from the base 14.7v setting would suit your battery.
Thanks. I realised this in bed this morning. But I would be interested in the fact that the charger senses the temperature at the start, but doesn't the battery heat up during charging, and therefore the voltage needs to be dropped again?
