question

Michael Connolly avatar image
Michael Connolly asked

712 shunt power pin removal

I need help on how to temove the positive battery connection on the shunt of the 712. I am swapping the simple power connector cable for the thermometer which uses the same pin connections. Tried pulling the pin but no joy. Tried lifting the yellow thing on top of the pin connector on the shunt but no joy!!! Anyone able to help???

BMV Battery Monitor
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
wkirby avatar image
wkirby answered ·

You need to push the orange tab down towards the PCB and then pull the wire out.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Guy Stewart (Victron Community Manager) avatar image Guy Stewart (Victron Community Manager) ♦♦ commented ·

A very small flat head screw driver makes this easy.

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic