question

dhandl avatar image
dhandl asked

temperature correction settings doesn't accept bluesolar charger

Hello

I have the trouble to set the correct temperature correction value for a bluesolar ( firmware 1.16) 100/50. I have a 24v battery bank with two of this 12V batteries in serie. The manual indicates -30mv/K temperature correction for the cycle use.

Is it correct that in my case with 2x12V batteries = 24V bank I have to set the temperature correction to 2*-30mv/K = -60 mv/K?

The bluesolar doesn't accept the -60mv/K temperature correction value.

Is my calculation bad?


Thanks



p.s Sorry guys there is the link for the battery manual: https://www.apb-energy.fr/site/medias/batterie-solaire/UCG200-12.pdf

MPPT Controllerstemperature compensation
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers

Related Resources

MPPT Product Page

MPPT Error codes

MPPT 150/60 up to 250/70 Manual

Additional resources still need to be added for this topic