This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Stephen
You need VE.direct to USB cables and an (aktiv) USB-Hub.
It is possible to connect more VE.Direct devices using VE.Direct - USB cables and a good reliable USB hub. I like the D-Link USB hubs or any with a SMSC (Microchip) chipset.
VE.Direct - USB cables like these: https://www.victronenergy.com/accessories/ve-direct-to-usb-interface
However, I think the CCGX does not have enough CPU power for six VE.Direct devices, five is the recommended limit.
Check the comparison table below and look at the Performance section.
https://www.victronenergy.com/live/venus-os:start#comparison_table
ok will look at it , was looking at adding the OCTO unit , thin i can downsize to get less
looks like i also need
This wiring kit is for he CANvu GX.
The Octo GX has 8 VE.direct ports.
