question

Mark avatar image
Mark asked

Tank sender resistance change (venus rpi)

Hi all

is there any way of altering or adding the resistance levels?

I have one sender in my water tank 0-190 ohm works perfectly albeit a little slow.

I also want to use one for my gas tank which has a 5-96 ohm range, id either like to add another resistance choice in the drop down or edit the American one to suit this sender as the Europe setting is right for my water tank sender.


Thanks

Mark


Venus OSRaspberry Pitank monitorsensor
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
mvader (Victron Energy) avatar image
mvader (Victron Energy) answered · Best Answer

Hi Mark, good news, its coming. For more details, see here: https://community.victronenergy.com/questions/41629/tank-sensor-calibration.html

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic

GX Tank 140 product page

Connecting tank monitoring to Cerbo GX

Additional resources still need to be added for this topic

Raspberry Pi running Victron’s Venus firmware - Blog Post

Venus OS Large image: Signal K and Node-RED - Install

raspberrypi install venus image


Victron Venus OS Open Source intro page

Venus OS GitHub (please do not post to this)