question

Johannes Hodne avatar image
Johannes Hodne asked

Smartsolar 100/20 virtual load vs load port.

Hello. I got a smartsolar 100/20 and use the streetlight function for a hunting light, but I need power for an IP camera 24/7 (if battery voltage is ok)

Is it possible to have the load port only protected by the load output configuration, and then control the virtual load with the streetlight function, not affecting the on board load ports?



VE.Bussmart solar set-up helpStreetlight
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
wkirby avatar image
wkirby answered ·

Unfortunately, these are not separate, so cannot be configured to do separate things.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic

What is VE.Bus?