I just discovered my system draws 50% pwr consumption from grid although battery is 68%.
Main LED and Inverter LED are flashing, Bulk is on. First time this happens.
asked
Multigrid Mains and Inverter LED blinking
Hi @Vicky
this LED code means 'Feed-in with PV power'
Probably because you're using power assist to the input (non critical loads)
Hi @Daniël Boekel (Victron Energy Staff), Yes I do use power assist, however what I am wondering is why the Multigrid doesn't limit grid power to the setpoint (30W). So far this was always the case, it is the first time I see this different behavior, ignoring the setpoint. Similar today in the morning, Although PV Power is available, Multigrid draws power from grid, even to charge battery (minimum SOC 25%). I'll continue watching this.
I couldn't possibly tell you without knowing more about your system and the settings. also if this is only momentarily or for longer periods.
I close this one as the ignored grid setpoint is a different topic
