Hi everyone!
I am looking for the maximum torque recommended for two productos:
- Shunt BMV712
- Mega Fuse for fuse 200A/58V
May you provide these values? They are not available neither on the manuals nor the datasheets.
Thanks!
Fernando
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi everyone!
I am looking for the maximum torque recommended for two productos:
- Shunt BMV712
- Mega Fuse for fuse 200A/58V
May you provide these values? They are not available neither on the manuals nor the datasheets.
Thanks!
Fernando
Not sure about the Victron 500A/50mV shunt, but the similar Blue Sea Systems shunt values are:
M4 Brass Screws - 7 inch lbs M10 Brass Bolts - 190 inch lbs.
You should be able to find the values for the fuse in the specs for the fuse holder. It's based on the mounting stud torque values.
Pat
Hi,
I went to the datasheets and there is nothing there. I may take the value for M10, but I know these values usually depend on the step, so I don’t have enough information.
Any official recommendation @mvader (Victron Energy Staff)?
Regards,
Fernando
Additional resources still need to be added for this topic
3 People are following this question.