Hi All
Happy New Year
I was just wondering if there was anyway to connect the bluesmart ip22 charge to venus on rpi?
Thanks
Mark
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi All
Happy New Year
I was just wondering if there was anyway to connect the bluesmart ip22 charge to venus on rpi?
Thanks
Mark
Hi @Mark,
There is no supported way to connect the BlueSmart Battery Chargers IP22 to a GX device, or other running Venus.
Usually connection to a GX requires some data port (VE.Bus, VE.Direct). The Bluetooth interfaces are usually accessed using VictronConnect.
Generally speaking - the list of compatible products supported by the GX range (eg CCGX) and other unsupported devices running VenusOS (eg Raspberry Pi) is the same - https://www.victronenergy.com/live/ccgx:start#connecting_victron_products
Victron Venus OS Open Source intro page
Venus OS GitHub (please do not post to this)
Additional resources still need to be added for this topic
Additional resources still need to be added for this topic
Raspberry Pi running Victron’s Venus firmware - Blog Post
Venus OS Large image: Signal K and Node-RED - Install
raspberrypi install venus image
11 People are following this question.