question

bootscootin avatar image
bootscootin asked

Buck Boost Zero Amp Output

Just installed a 100amp Buck Boost. Configured it but have Zero amp output. Set it @ 20amp output to try and save my current alternator setup. Will possible change it in the future .We have 2-200ah Victron Lithium batteries controlled by a BMS protected by a Battery protect. Have I set something up wrong? Was hard to find setting for a 24v system so just doubled what I found with the VW install.
Thx for all your Help
battery chargingLithium BatteryBMSOrion DC-DC Converters not smart
buck-boost-001.jpg (132.5 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

Option 24 (and 25 + 57) is for the input. So the BB don't charge because the input voltage is below the value at option 24.

If you move the cursor over an option you will have an explanation in the lower left corner.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

bootscootin avatar image
bootscootin answered ·

Thanks for the info

Misunderstood the original setup spec

All working Now


Reset amp output to 10amps as don't want to burn up my alternator

Currently we are now on the road for a month

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.