Can mixing different panels damage MPPT controller or panels? I already have BlueSolar 150/85 MC4 MPPT and 2 x 300W Amerisolar panels. Those two panels will be fixed on the roof of my van and there's no more room because of the roof vents. So I was thinking if I could make a foldable panel set which would be easy to store and use when possible. Panels connected into Mppt's PV connectors would be like:
1) 300W mono panel, Voc 38,8V, Isc 9,88A, Vmp 31,7V, Imp 9,47A.
2) 300W mono panel, Voc 38,8V, Isc 9,88A, Vmp 31,7V, Imp 9,47A.
3) 4 x 90W poly panels, Voc 23V, Isc 5,07A. 2 in series and 2 in parallel.
I know it's not generally recommended but fitting third big panel anywhere would be really difficult (would be cheaper though).