question

aloisschoenbaechler avatar image
aloisschoenbaechler asked

Does LE.Smart Networking support the following scenario: Two SmartSolar MPPT Chargers connected to the same PV-Panel but different Batteries with different charging characteristic where as one Battery will have priority over the other?

smart solar set-up help
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

No you can't use two MPPTs at one panel. Both MPPTs trying to find the MPP and working against each other.

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

aloisschoenbaechler avatar image aloisschoenbaechler commented ·

Very well. Through LE.Smart Networking it would be technicaly possible to negotiate which SmartSolar MPPT Charger would back off and which would use the PV-Power.

0 Likes 0 ·
klim8skeptic avatar image klim8skeptic ♦ aloisschoenbaechler commented ·

I suppose you could turn 1 controller "off" via Victron connect.

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic