question

hartz avatar image
hartz asked

Does Victron have any way to activate an alarm for high (A) high charge / discharge intensity in the battery?



Can it be done using the BMV or CCGX, or with a VE.net battery controler?

I would need this function to activate a relay in a 48Vdc sistem, to desactivate PV systems when the solar energy is high and inverter consuption is low, to protect the battery



MPPT ControllersBMV Battery MonitorBMSCCGX Color Controlmonitoring
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Murray van Graan avatar image
Murray van Graan answered ·

Hi @HARTZ, it is possible to control the charge current by using the DVCC function in the color control. Read this, point 4: https://www.victronenergy.com/live/ccgx:start

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.