I am about to install BMV712. Do I connect all of the cables on the negative battery terminal to the load side of the shunt or only the ground cable.

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

rodj asked Dec 13, '19

2 x 100ah AGM, ctek 250a dcdc charger, Victron multiplus 1600, 3 x 100w solar.

battery

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2019-12-13T06:25:01Z

yannick answered · Dec 13, 2019 at 06:25 AM

All the cables on the negative terminal have to go to the load side of the shunt. See the manual.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2019-12-13T07:34:58Z

rodj answered · Dec 13, 2019 at 07:34 AM

Thank you for the clarification

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.