question

mick-on-belle avatar image
mick-on-belle asked

Phantom devices populating my device list on LAN device list - can they be removed?

System devices - Bmv 700, 2x 100/20 48v MPPT chargers, multiplus 3000/48v inverter charger through a VenusGX controller.

BMV connected via ve/USB, mppt’s via ve direct and inverter by be bus.

Phantom devices include Quattro inverter, MPPT charge controller, various batteries and tanks.

This is a new install, all new equipment, there are no other users Victron devices within wifi range.

Thanks

Mick.

Venus GX - VGX
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

Hi Mick, most likely the demo mode is enabled, see Settings -> General, and then at the bottom.


Hope that helps!

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.