Hi everybody!
I intend to install a 3-phase off-grid system using 3x Victron Quattro 5000VA/48V and one B-BOX PRO 13.8.
Is there any compatibility problem between them?
Thx!
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hi everybody!
I intend to install a 3-phase off-grid system using 3x Victron Quattro 5000VA/48V and one B-BOX PRO 13.8.
Is there any compatibility problem between them?
Thx!
Hello Lucas,
The issue would be the surge power. Note that the bbox 13.8 would only allow a surge power of 13.3kw but 3xquattro would allow up to 30Kva. So the minimum configuration list recommends at least 3 units of bbox 13.8.
Thanks for your reply.
My installation doesn't need 30 kVA surge power and it's out of budget to add two units more of bbox 13.8.
I also understand that the bbox has it's own protection and it should disconnect when it overloads the battery, am I wrong?
2 People are following this question.