question

vincent avatar image
vincent asked

Multiplus II external current sensor for monitoring autotransformer

In a system with parallel Multiplus II 230V output through an Autotransformer for split phase, can I use an external current sensor to monitor the center tap current and report it via MQTT?

Multiplus-IIgx deviceAutotransformer
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

Hi Vincent, not possible (with Victron equipment), sorry.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.