If I connect a Smart Solar MPPT, BMV 712 and a Smart Battery Sense in a VE Smart Network, will the BMV and MPPT both receive temperature data from the SBS?
I want to use the second input on the BMV shunt as a voltage sense for the starter battery.
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
If I connect a Smart Solar MPPT, BMV 712 and a Smart Battery Sense in a VE Smart Network, will the BMV and MPPT both receive temperature data from the SBS?
I want to use the second input on the BMV shunt as a voltage sense for the starter battery.
Hi Linky,
"Will the BMV and MPPT both receive temperature data from the SBS?" Only the Mppt will receive the temp data.
"I want to use the second input on the BMV shunt as a voltage sense for the starter battery" A good solution if you don't have the temp sensor for the BMV.
Victron BMV battery monitors product page
MPPT 150/60 up to 250/70 Manual
Additional resources still need to be added for this topic
Smart Battery Sense Product Page
14 People are following this question.
Are 50vdc solar panels wasted on a 12vdc system?
SmartSolar MPPT 150/85 VE.Can - No current flow in Bulk with PV at VOC
Large difference between solar blanket voltage output and Victron dashboard
Victron MPPT 75/15 Low PV Voltage Reported - Won't Charge
Peak Power Pack 40Ah and SmartSolar charge controller - how to connect & setup