question

nesheli99 avatar image
nesheli99 asked

Float mode voltage adjust output decays to nothing.

Skylla TG 24V/50A without battery bench testing

Boost mode voltage adjustment OK up and down.

(switches set as per manual no battery connected)

Float mode voltage as soon as I started to adjust it the output voltage just decayed to nothing. (switches set as per manual no battery connected)

Checked mode switches operation with a multimeter - OK

removed and tested float potentiometer - works fine no glitches.

Turned off for a few days, then connected voltage sense wires to output in case that option helps.

Float voltage adjustment OK up and down for a short time. Subsequently the charger output just decayed to nothing.

Where do I get service manuals from please? Problems are easy to solve with a service manual and schematics. Without I will need to remove all the conformal coating and everything just takes an unnecessary long time. We also have three newer skylla-i 24/80 in operation which are probably out of warranty now.

charger
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Daniël Boekel (Victron Energy Staff) avatar image
Daniël Boekel (Victron Energy Staff) answered ·

Hi @nesheli99

You'll have to contact a repair center for repairs:

https://www.victronenergy.com/where-to-buy

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic