Does anyone know where I can take the inverter to be repaired and have cables and firmware updated near Parramatta?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Does anyone know where I can take the inverter to be repaired and have cables and firmware updated near Parramatta?
Hi Franky. Have a look through here: https://www.victronenergy.com/where-to-buy
Now these are 'Dealers', not necessarily 'Service Partners', but perhaps a ring-around the ones near you may unearth a gem, or at least find out what they would do.
Good luck too.
Hello Frank,
First point of call is the company you bought the unit from. They should be able to help you with this. But if that is not possible, then you can contact Powerbox Australia, they are located in Mount Kuring Gai and are our Repair Centre for the Sydney area. Contact detail can be found in the wheer to buy section on our website. But please first contact your Victron Dealer first. This is by far the best and easiest option.
Additional resources still need to be added for this topic
10 People are following this question.