question

vastine avatar image
vastine asked

multiplus Self-consumption hub-1 setting

Hi there

My system is use in a camper van. sometimes connect the grid power for battery charge or ac load.

My system items below:

Multiplus

Isolation trans

CCGX

BlueSolar MPPT 150/85 VECan

VE.Bus BMS

BMV-712

Victron energy 300ah battery smart


In my case I should to use the "Self-consumption hub-1 Assistant right?

The next option is "Connect to mains,no feedback"

I live in Taiwan, so I choose the grid code option is others right?

And that option ask me password

Can sent me the password?

Thanks

ESS
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

Hi; hub-1 (and also its replacement, ESS) are not meant for Yachts, Vehicles and other installations with a pluggable shore connection. They are not safe in those situations

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

ben avatar image ben ♦ commented ·

I assume the issue is that the system can't guarantee that the plug is not hot. Is that right?

Would the recommendation change if there were no pluggable shore connection, but nevertheless the system was mobile: for example, a generator and PV, but all permanently wired?

0 Likes 0 ·
mvader (Victron Energy) avatar image mvader (Victron Energy) ♦♦ ben ♦ commented ·

Hi Ben; yes it would; then ESS is fine

1 Like 1 ·

Related Resources

Additional resources still need to be added for this topic