question

PETER RYSHOLT CHRISTIANSEN avatar image
PETER RYSHOLT CHRISTIANSEN asked

Quattro Programmable relay - AC input

Hi, What are the AC input conditions for the relay to shift? Via the programmable relay we would like to know if the load is on inverter or on mains.


It seems like the relay is switching all ready at approx 50VAC input voltage!? Result: The relay indicates that AC input is available, but of course the load is still on inverter at this low input voltage.



RelayAssistants
1574332976380.png (79.9 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Daniël Boekel (Victron Energy Staff) avatar image
Daniël Boekel (Victron Energy Staff) answered ·

@Peter Rysholt Christiansen

It seems you've already found out...

How can you have 50VAC on the input?

1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

PETER RYSHOLT CHRISTIANSEN avatar image PETER RYSHOLT CHRISTIANSEN commented ·

Hi, Daniël,

NO, I did not find out.

I am still looking for a relay function to indicate if the load is on inverter or on mains.


How is it that the Quattro says "AC input" at all ready 50VAC input voltage? The 50VAC input voltage is the voltage we reached during lab test when the programmable relay switched.

0 Likes 0 ·

Related Resources

VEConfigure Assistants manual

Additional resources still need to be added for this topic