This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
After the recent firmware update, I can see battery monitor listed in the app, but won't connect... It gets to 20% connection and just hangs they're forever. The mppt connects no problem.
I tried unpairing the Bluetooth and repairing, which didn't help. I tried unplugging the cable from the monitor and replugging it in, but that didn't help either. Any suggestions?
Take a look at Section 10: Troubleshooting - 'Connection fails around 20%' in the VictronConnect online manual;
https://www.victronenergy.com/live/victronconnect:start
The recomnended fix is to unpair and change the PIN code. Click on the links in blue for more information.
