I’ve used a pc to update the firmware on the multiples compact 12/2000 to v209. (I could not update it from my Mac because the firmware was so old. So I had to borrow someones PC). Now I can see it with my ViltronConnect on my app on my Mac. When I start it, however, I get a message that states that my firmware needs to be updated from v209 to v4+. It does not update it automatically.
When I go to settings to update the firmware, I need a dealer passcode to do anything.
I’d like to update my firmware and settings - how do i get a passcode to do so?
Next, I have (3) Relion 300ah batteries. I don’t know the settings for the multiplus for these batteries. Do I need an assistant loaded? I am in desperate need of configuration help. I’ve looked at all the manuals and, frankly, they contradict each other or they don't outline the lithium settings by each tab. So I’m stumped.
When I use my toaster oven with the inverter, the “overload’ light comes on. The specs are 1800W max power consumption, and pulls 15amps when at full power. Is that a setting that I need to change on my inverter to allow it to work?
How do i configure the multiplus to use our Honda 2000i generator? Do I need any assistants?
Our boat is on the hard for 4 months this winter. Do I need to change the inverter settings for possible cold weather?
Help!