question

rcrjacob avatar image
rcrjacob asked

Raspberry Pi Touchscreen Setup

Not sure I'm going about this right. In my trailer I have a MPPT 100/15 solar controller installed. I bought a Venus GX and will be buying a Multiplus 12/300/120. I purchased a Raspberry Pi 3 B+ to use instead of a CCGX as a display. What do I need to do to set this all up to seamlessly observe and control my system? I thought I had it figured out until I went to set up Venus OS on the Pi.

Raspberry Pi
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
markus avatar image
markus answered ·

Hi, here is a way to make it work:

you can use the Raspberry Pi (with Raspian) as a mirror screen for your VenusGX.

https://community.victronenergy.com/articles/5930/disable-hotkeys-in-venus-remote-console-on-lan.html

Regards,

Markus

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.