Hello i updated the ess and now no feed in anymore.
feed in is enabled in the victron panel. i dont understand why it is not working anymore...
can someone tell me how to truble shoot this? i am happy to give more informaiton :D
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello i updated the ess and now no feed in anymore.
feed in is enabled in the victron panel. i dont understand why it is not working anymore...
can someone tell me how to truble shoot this? i am happy to give more informaiton :D
hello, i found the problem.
somehow the quattro 8000 was set to off in the ccgx and this coused the strange behavior. the leds on the quattro showed it was on normal. so i did not thought about that and it took me some time to trouble shoot.
thank you anyhow for the quick response.
case closed.
Hi @wudycool,
Please confirm you are running the current latest firmware on all devices on the system. It is the first thing to check in a troublesome system.
Also, can you please tell me the grid code used, and the grid code settings.
Also, can you please check the AC input current (A), and power (W), and make sure the power factor is what it should be.
10 People are following this question.