This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have an EasySolar 48/3000/35 on a vessel which has Panels & Shore Power connected, which charges a couple of 48v batteries which is used to provide 240v at sea. Being an American-made boat, how can I connect an Auto Transformer and convert 240v to 120v just for some specific 120v loads.
do I need to connect the ground relay control between the EasySolar and the Autotransformer.
Hi MR. There's a little about them in the datasheet. https://www.victronenergy.com/upload/documents/Datasheet-Autotransformer-32A-and-100A-EN.pdf
Also other posts on this forum that you may glean something from: https://community.victronenergy.com/topics/Autotransformer.html
The innards of your Easy box are the same as a Multiplus.
Can't seem to find a manual for them right now. Maybe someone else can find it?
