question

jeff29620 avatar image
jeff29620 asked

Multiplus 2 story

Hello everyone.

In France, I discover that we are all alone when we buy a Victron product. The salesperson only knows how to sell, gives bad advice, and the after-sales service only knows how to replace the entire device.

Concerning the Multiplus II, no one has been able to explain how it works to me, or sell me a simple replacement switch.

I turn to this forum with hope.

My question (finally): with the Multiplus 2, which card should I buy to connect via Bluetooth to the smartphone, and what can we follow on this application?

victron products
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
nickdb avatar image
nickdb answered ·

Depends what you want to do.

The best solution can be found here:

https://www.victronenergy.com/monitoring

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

chrigu avatar image
chrigu answered ·

You can get an idea of how a connection to a multiplus looks like in VictronConnect by using the demo library. It will let you connect to a simulated device and show you all the information and the settings.

Same for VE.Config, you can make a connection to a fake target.

Im not sure if theres something similar for VRM or the Cerbo/Ekrano menus

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic