question

dannypm avatar image
dannypm asked

PowerAssist on Multi 24/3000/70-50 not working

My MultiPlus 24/3000/70-50 with firmware 2610422 when connecting a 1.5kW load it disconnect the Mains and switch to inverter mode and using solely the batteries.

The PowerAssist is enabled but it doesn't seem to work.

How can I get the PowerAssist working? Is the firmware a culprit?


Thanks in advance

MultiPlus Quattro Inverter Chargerfirmware updatepowerassist
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Paul B avatar image
Paul B answered ·

First of all I would upgrade the unit to the latest firmware using a MK3 usb to VE bus unit then see if the problem still occured

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.