After GX Update no full power of MPPT RS 450/200

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

This question was closed Aug 24 at 01:15 PM by nickdb for the following reason:

question

hg6806 asked Aug 24, '24

Hello all,

unfortunately I can't post in the German forum.

Yesterday I updated my 3x MP2/3000 and its MP2/3000 GX with the newest SW.

Now I can not reach full power of my MPPT RS450/200

Here is a picture of my constellation:

I configured the system again with VE configure and the ESS assist.

The problem is that I can't remove SMA SHM2.0 energy meter. I can remove it in VRM but after a few seconds it is back.

And in Remote Control I don't know how to delete.

ESS

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2024-08-24T13:15:15Z

nickdb answered · Aug 24 at 01:15 PM

Thanks

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.