question

edstobi avatar image
edstobi asked

MaxChargeCurrent with node red

hello

I can set the MaxChargeCurrent via the cerbo.

In mqqt I can see the value under

/settings/0/Settings/SystemSetup/MaxChargeCurrent.

Now I am looking how I can set the value down with node red to protect the generator from overload when the batteries are charged and a large consumer starts.

Can someone tell me which node I can use to control this, with the ESS Charge Mode, for example, I can choose between 9 - ‘Keep batteries charged’ mode is enabled or 10 - Optimised mode w/o BatteryLife: self consumption, SoC at or above minimum SoC, but that's not enough yet i nead them max A for charging

I trei node custom control MultiPlus II (276) /DC0/0/MaxcahrgCurrent but it is not the same like the value in the Cerbo

THX
edstobi




Node-REDsystem status on cerbo gx
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
edstobi avatar image
edstobi answered ·

UI treid the node custom control MultiplusII (276) /DC/0/MayChargCuttent
but it is not the value lik in the cerbo




2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

nickdb avatar image
nickdb answered ·

@EDSTOBI please repost this on the new modifications forum, as we can't move it.

Details pinned in the top announcement on the old modifications section. Thanks.


2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.