El VirtualSwitch a que relay comanda

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

Uvaldino Duarte asked Oct 31, '19

Estoy configurando un Quattro 24 5000 con el Software VEconfigure y dentro me encuentro con el VirtualSwitch.

la pregunta es ¿ la configuración de VirtualSwitch a que raley pertenece o a que relay comanda (K1 K2 AUX 1 AUX 2 O RELAY )

esperando su pronta respuesta.

Relay

quattro-24-5000va.jpg (1.6 MiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2019-11-05T18:42:19Z

Daniel Toribio answered · Nov 05, 2019 at 06:42 PM

Hola,

Obede al que está situado en la esquina superior derecha.

No obstante, es fácil de comprobar midiendo continuidad entre NO y C tras cumplirse la consigna establecida.

Un saludo.

screenshot-2019-11-05-19-40-01-659-comandroidchrom.png (87.0 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2019-11-08T13:53:53Z

cquinones (Victron Energy Staff) answered · Nov 08, 2019 at 01:53 PM

Hola Uvalduino y Daniel,

Mejor seguir este link

https://www.victronenergy.com/live/ve.bus:virtual-switch-generator-start-stop

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.