This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello
I have a Cerbo running node red with a fair amount of flows.
Not only for Power related things but also for Home Assistant in General.
Performance is fine, v3 Doesn't bother me that much and I backup my Flows.
Is the Cerbo ok for this? will the disk be fine for years with any access I do?
I also use MQTT but I would imagine most things are done in Ram.
Thanks for any Comments
I’d be interested to know what you end up doing as I’m in a similar situation. Have nodeRED, MQTT & modbus running on a cerbo gx & a Home Assistant instance. I seem to be leaning towards sending MQTT Victron data to Home Assistant and running all the automations there. Except for a few more critical automations that run locally on the cerbo.
Please repost this on the new modifications section as per the pinned announcement at the top of the section. Thanks.
