I have 2 100/30 Smartsolar MPPTs integrates with a Quattro 5000 into an ESS, running on 24V lithium batteries.
I understand that with ESS the inverter takes control of the charging profile from the MPPTs.
However, I was looking under “Networked Operation” section of my MPPTs and noticed the following screenshot
Why/how is charge voltage 30V?!?
Nothing anywhere is set to that voltage
Not the MPPTs locally
Not the bmv’s battery settings
Not the inverter veconfig settings
So I’m confused as to where this is coming from and how/why.
I doesn’t appear to be causing any issues as charging appear normal, but...
Should I be concerned about this?
Thanks in advance