question

Andreas Åström avatar image
Andreas Åström asked

Show AC frequency on AC loads in gui-v2

I installed the beta on my cerbo gx and had a brief look at the gui-v2 component.

Would it be possible to show AC frequency on the AC load UI components? I run an off grid system and this is an indicator of active curtailing, Victron telling PV inverters to hold back (spilling solar).

I can see this in the system dashboard on vrm online but not in remote console or gui-v2.

gui modsgui-v2
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
nickdb avatar image
nickdb answered ·

Please keep beta questions to the beta section on the forum, announced in modifications section.

First read the how to post pinned topic in the main beta category, making sure to read the change log and existing topics to see if it is already documented.

Thanks.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic