question

Pierre Martin avatar image
Pierre Martin asked

Lynx Distributor Fuse

Good afternoon all,

Today I've tried to wire the RJ10 port to power, to get the Lynx to report fuse status.

I've connected the black wire to my negative busbar, and the yellow wire to my stepdown converter.

Just to be clear - I've made a mistake and this is my bad. My stepdown was set to 10v instead of 5v.

Something emitted a small crack and a bit of smoke. I'm wondering if there's an onboard fuse I can change, or if I should just get a new Lynx.


Thanks!

fuseslynx distributor
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Pierre Martin avatar image
Pierre Martin answered ·

Bump... Anyone please?

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources