question

ropo avatar image
ropo asked

Blue Smart IP22 update with temperature control & charging stop for LiFePo4 Batteries?

Hi,

maybe someone knows about a possible Firmware-Update of the Blue Smart IP22 (12V/3 Outputs) to control the temperature and stop charging of a LiFePo4 Battery for example if the temperature is lower than 5°C. And of course a update to integrate the IP22 into the victron bluetooth network with smart battery sense sensors.

The SmartSolar MPPT for example has this options to stop the charging when the temperature is to low for a LiFePo4 battery (and i can use the SmartSolar with the smart battery sensors).

Thank you for your support.

Roman


battery chargingLithium Batterychargerfirmware updatetemperature
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Christian Lindermann avatar image
Christian Lindermann answered ·
1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

ropo avatar image ropo commented ·

Over one year? Oh Victron, that's sad... :-(

But thank you for your link.

0 Likes 0 ·