IP22 30A 3 outputs - continous power to bus bar

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

This question was closed Aug 13 at 06:39 PM by Justin Cook for the following reason: The question is answered, right answer was accepted

question

rayt asked Aug 13, '24

Can 1st output connect to 12V bus panel for continous power and 2nd output to a battery for charging?

bluesmart ip22

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2024-08-13T15:34:46Z

Matthias Lange - DE answered · Aug 13 at 03:34 PM

The outputs are connected together internally. You can only configure one charging algorithm.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.