USING NODE RED IN VENUS OS LARGE TO GET DATA FROM OTHER INVERTERS

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

This question was closed Aug 13 at 12:00 PM by nickdb for the following reason: Please use new modifications section.

question

aku asked Aug 13, '24

I have Venus OS large installed in Raspberry Pi. Is it possible to use the node red that runs in Venus to get data from other inverters such as SRNE?

Venus OS Node-RED Raspberry Pi

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

116 People are following this question.

Answer 1 · 2024-08-13T11:59:57Z

nickdb answered · Aug 13 at 11:59 AM

Please note that this is a topic for the modifications section, which has moved.

Refer to the pinned announcement for how to access the new home.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.