This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have tried resetting the History on a BMV 712 smart by holding the select button for 5 seconds (and longer) but the history remains. I tried doing this while in the regular menu and also while in the History menu but the history still remains.
I did a full reset by holding the setup and select buttons for 3 seconds and although this removed all of the settings it still did not remove the History.
Please can I get some help with resolving this issue.
Thanks.
From a post on another forum:
To clear the history on the BMV-712:
1: On the wired remote display -Press the Setup button for 2+ seconds. The display will start scrolling "01 Battery Capacity"
2: Press the + button a few times, until the display shows "63 Clear History"
3: Press the Select button
4: After a second or two, press the Select button again
5: Press the Menu button
It will reset but follow instructions at section '4.2 Function Overview' exactly!
